Huddly L1/S1 compatibility with Barco

For information about Huddly IQ, Canvas and GO compatibility with Barco, please see this FAQ.

Huddly L1, S1, C1 and Crew are now certified with Barco ClickShare products.

With firmware 02.24 or later from Barco you can use Huddly L1, S1, C1 and Crew on your Barco ClickShare device. If you are using the Network Adapter, you need firmware 02.22 or later from Barco.

Requirements

• Barco ClickShare (CX-20/CX-30/CX-50) running firmware 02.24 or later
• Huddly L1 running firmware 1.8.11 or later
• Huddly S1 running firmware 1.8.9 or later
• Huddly Crew running firmware 1.9.1 or later
• Huddly C1 running firmware 1.9.4 or later

Installation

Connect the ethernet cable from the Huddly L1/S1/Crew to the Huddly USB Adapter and connect the power supply to the adapter. Then connect the USB cable from the Huddly USB Adapter to the Barco ClickShare unit. The Huddly camera is now ready to be used through the Barco ClickShare.

Known limitations

• The video resolution is limited to 720p30.
• The camera shows up at "Room camera" in your video client.
• You can not use the Huddly Desktop App or Huddly Connect App to control the camera.
• You can not upgrade the camera firmware using the Barco ClickShare.